Easy Portable Flash Setup

2

Comments

  • ziggy53ziggy53 Super Moderators Posts: 23,762 moderator
    edited July 20, 2006
    lghb wrote:
    Is there a reason the pictures are not showing up on my puter?

    This is a fairly old thread. I'm guessing that Shay either moved or renamed the files.

    The article is preserved with images here:

    http://dgrin.smugmug.com/gallery/1166287

    ziggy53
    ziggy53
    Moderator of the Cameras and Accessories forums
  • Shay StephensShay Stephens Registered Users Posts: 3,165 Major grins
    edited July 20, 2006
    Yes, sorry, recent server changes have obsoleted some of the old photos I had up.
    Creator of Dgrin's "Last Photographer Standing" contest
    "Failure is feedback. And feedback is the breakfast of champions." - fortune cookie
  • wxwaxwxwax Registered Users Posts: 15,471 Major grins
    edited July 20, 2006
    Yes, sorry, recent server changes have obsoleted some of the old photos I had up.
    How harsh of you.
    Sid.
    Catapultam habeo. Nisi pecuniam omnem mihi dabis, ad caput tuum saxum immane mittam
    http://www.mcneel.com/users/jb/foghorn/ill_shut_up.au
  • Antonio CorreiaAntonio Correia Registered Users Posts: 6,241 Major grins
    edited September 24, 2006
    Shay,
    The photos in your 1.st post are not there anymore ...
    Or is it my computer's fault ?
    Thank you.
    thumb.gif
    All the best ! ... António Correia - Facebook
  • CasonCason Registered Users Posts: 414 Major grins
    edited September 24, 2006
    Shay,
    The photos in your 1.st post are not there anymore ...
    Or is it my computer's fault ?
    Thank you.
    thumb.gif
    See posts 32 and 33...
    Cason

    www.casongarner.com

    5D MkII | 30D | 50mm f1.8 II | 85mm f1.8 | 24-70mm f2.8
    L | 70-200mm f2.8L IS II | Manfrotto 3021BPRO with 322RC2
  • Antonio CorreiaAntonio Correia Registered Users Posts: 6,241 Major grins
    edited September 24, 2006
    RTP wrote:
    See posts 32 and 33...
    thumb.gif
    All the best ! ... António Correia - Facebook
  • LoriciousLoricious Registered Users Posts: 4 Beginner grinner
    edited September 25, 2006
    Hi Shay,

    I've looked at a few of your posts and I'm having a reocurring problem I hope you can help with. Can you tell me why all of the photos I've seen thus far on your posts come up as little x's with a box around them? Is there something I need on my computer to view these photos? I am aware this is probably a dopey question, but for the non computer literates like me, maybe you could help out. Thanks a bunch, Lori
    So you want to fire off some off-camera flash while you are out and about eh? It's not hard, you just need a few things.

    Here is an example using a Sony 828 camera and a Sunpak 383 flash. You can use anything you want, any camera and flash combo that works. I am currently using a Canon 20D and a Sunpak 555 flash.

    So the first example is the flash on the camera. You will no doubt recognize this look:

    DSC04190-copy.jpg


    What we will do is get the flash off the camera and on a light stand using a PC cord to trigger the flash. Lets first start with the camera. If your camera does not have a PC port, then use the hotshoe. Just install a PC to hotshoe adapter and connect the PC cord to the adapter.

    DSC02409.jpg


    Next is the flash. Put the lightstand in the position you want it, connect the umbrella adapter to the light stand and then mount the flash to the umbrella adapter. You can also mount an umbrella if you want bounced light.

    DSC02408.jpg


    This is what the whole setup looks like:

    DSC02406.jpg


    And this is what the camera sees with the new lighting. A big difference.

    DSC04190.jpg


    Now if you want to trigger the flash wirelessly, then you don't need a PC to hotshoe adapter and you don't need the PC cord. You will need a wireless set, in this example a pocketwizard plus transmitter on the camera and a receiver on the flash is being used. (Note: the umbrella is mislabeled, it is actually a 32")

    DSC04166.jpg


    This is showing the transmitter connected to the camera via the hotshoe.

    DSC02404.jpg


    Here is a list of pieces and parts that may be helpful for you if you are trying to generate a shopping list:

    Basics
    10 foot light stand - alienbees.com # LS3050
    Umbrella Adapter - B&H # SPB
    Shoot through umbrella - alienbees.com # U32TWB

    Wired
    Wired to 383
    PC to hotshoe adapter - B&H # HAHSPCA
    MS-PC10 PC to ( 2.5MM ) Microsync (10 FT) from paramountcords.com

    Wired to 555
    HS-15S Hot Shoe to Household ( 15 FT) from paramountcords.com


    Wireless
    pocketwizard receiver - B&H # WIPWP
    pocketwizard transmitter - B&H # WIPWPT

    Pocketwizard to Sunpak 383 Cable:
    sub-mini to miniphone cable - B&H # WICSM1

    Pocketwizard to Sunpak 555 Cable:
    Household to Miniphone Cable - B&H # WICHHM16

    Now all of this is suggestions and samples. Please feel free to choose alternate, better, cheaper equipment to suit your needs and desires.
  • DavidTODavidTO Registered Users, Retired Mod Posts: 19,160 Major grins
    edited September 25, 2006
    I can't answer for Shay, but this flash tutorial can be found here. Pictures and all! :D
    Moderator Emeritus
    Dgrin FAQ | Me | Workshops
  • LoriciousLoricious Registered Users Posts: 4 Beginner grinner
    edited September 26, 2006
    Thanks so much for the quick response David.
    DavidTO wrote:
    I can't answer for Shay, but this flash tutorial can be found here. Pictures and all! :D
  • AntoineDAntoineD Registered Users Posts: 393 Major grins
    edited September 26, 2006
    How one can ask a question which the answer is one post up... rolleyes1.gif:D
    have a quick look at my portfolio (there's a photolog, too) :: (11-07-2006) experiencing a new flash portfolio. What do you think?
  • SteveMSteveM Registered Users Posts: 482 Major grins
    edited September 28, 2006
    Thanks so much, Shay. I was actually just about to start a thread, asking if anyone has endeavored to go about portable light this way. I have a Canon Speedlite 430EX, which is decent for my event photography. I had been considering the 580 for more power, but at the same time, I've been thrust into the market of organizations wanting actual (school, club) portrait work done. I've been considering a fat $1600 Alien Bees setup consisting of a few monolights, soft boxes, stands as well as Alien Bees portable power. I'd still need a light meter, background stands, etc., AND to learn how to use it all, together, almost immediately.

    Do you think I could get professional, attractive results for 1-2 person full body shots (karate), using the 580 in off camera master mode, with the 430EX in slave (built in) as fill, and a couple of umbrellas? This sure would save me some money, maybe enough to get a decent light meter and lovely portrait lens (of which I'd certainly take suggestions on!!) and buy me some time to afford a full blown studio lighting solution and time to learn how to properly use it. Do you think this is a good way to go, or am I going to be disappointed?

    Of course, this reply isn't just for Shay! Any comments, flaws in my plan, or suggestions will be wholely appreciated!

    Thanks guys,
    Steve Mills
    BizDev Account Manager
    Image Specialist & Pro Concierge

    http://www.downriverphotography.com
  • SteveMSteveM Registered Users Posts: 482 Major grins
    edited September 29, 2006
    Bizzump.

    Any more input on this before I make a purchase? I have an itchy purchase finger!
    Steve Mills
    BizDev Account Manager
    Image Specialist & Pro Concierge

    http://www.downriverphotography.com
  • Shay StephensShay Stephens Registered Users Posts: 3,165 Major grins
    edited September 29, 2006
    SteveM wrote:
    Do you think I could get professional, attractive results for 1-2 person full body shots (karate), using the 580 in off camera master mode, with the 430EX in slave (built in) as fill, and a couple of umbrellas?...
    Light is light, you could do your work with nothing but the sun and reflectors. The canon lights are good ones and versatile. There are plenty of people out there doing portraits with them everyday. My concern is the speed at which you need to get this up and running. You might not have enough time, but then again, I guess that is the definition of "trial by fire" right ;-) I suggest not sleeping much and practicing like a _________ ;-) After a while of doing your thing, you will know what you need, if anything, to replace the equipment.
    Creator of Dgrin's "Last Photographer Standing" contest
    "Failure is feedback. And feedback is the breakfast of champions." - fortune cookie
  • SteveMSteveM Registered Users Posts: 482 Major grins
    edited September 30, 2006
    Light is light, you could do your work with nothing but the sun and reflectors. The canon lights are good ones and versatile. There are plenty of people out there doing portraits with them everyday. My concern is the speed at which you need to get this up and running. You might not have enough time, but then again, I guess that is the definition of "trial by fire" right ;-) I suggest not sleeping much and practicing like a _________ ;-) After a while of doing your thing, you will know what you need, if anything, to replace the equipment.
    I'm so overwhelmed right now. I've been reading non-stop for days. I guess my biggest problem right now with the 580EX is how to get it off-camera. They have a whopping 2' long hotshoe cord? What good is that other than for a flash bracket? Then there's adapting them to light stands and worrying about whether whatever off-camera system I use is going to be manual, E-TTL or preserve the E-TTL II. I'm going to be old and grey before I get this off the ground. I know nothing about any of this and can't afford to risk a $400+ mistake.
    Steve Mills
    BizDev Account Manager
    Image Specialist & Pro Concierge

    http://www.downriverphotography.com
  • Shay StephensShay Stephens Registered Users Posts: 3,165 Major grins
    edited September 30, 2006
    SteveM wrote:
    I'm so overwhelmed right now. I've been reading non-stop for days. I guess my biggest problem right now with the 580EX is how to get it off-camera. They have a whopping 2' long hotshoe cord? What good is that other than for a flash bracket? Then there's adapting them to light stands and worrying about whether whatever off-camera system I use is going to be manual, E-TTL or preserve the E-TTL II. I'm going to be old and grey before I get this off the ground. I know nothing about any of this and can't afford to risk a $400+ mistake.
    If you are doing studio type flash, don't rely on ttl, go manual exposure on camera and flash units. Now having said that, I do believe there is a transmitter (B&H# CASTE2) you can get that will trigger the canon flashes. That will get it off camera.

    The trouble is, lighting is expensive, it takes time to learn, and you always need something else ;-) So determine what your needs are, buy to that, and figure on needing something else later anyway. Right now, most of my equipment purchases are lighting related.

    I am using Sunpak 555 units, but I seem to be burning through them faster than I like. So I am going to try a metz flash next.
    Creator of Dgrin's "Last Photographer Standing" contest
    "Failure is feedback. And feedback is the breakfast of champions." - fortune cookie
  • SteveMSteveM Registered Users Posts: 482 Major grins
    edited September 30, 2006
    If you are doing studio type flash, don't rely on ttl, go manual exposure on camera and flash units. Now having said that, I do believe there is a transmitter (B&H# CASTE2) you can get that will trigger the canon flashes. That will get it off camera.

    The trouble is, lighting is expensive, it takes time to learn, and you always need something else ;-) So determine what your needs are, buy to that, and figure on needing something else later anyway. Right now, most of my equipment purchases are lighting related.

    I am using Sunpak 555 units, but I seem to be burning through them faster than I like. So I am going to try a metz flash next.

    Thanks Shay. That put me at ease quite a bit. I think I'll go with a 580EX to compliment my 430EX and the ST-E2 trigger and figure out how to adapt em to light stands and umbrellas. That should put me around the $800 range total which is a lot better than $1600 and a heckuvalot more portable. Any recommendations/suggestions on a EOS mount portrait lens?

    Thanks again,
    Steve Mills
    BizDev Account Manager
    Image Specialist & Pro Concierge

    http://www.downriverphotography.com
  • Shay StephensShay Stephens Registered Users Posts: 3,165 Major grins
    edited September 30, 2006
    SteveM wrote:
    Thanks Shay. That put me at ease quite a bit. I think I'll go with a 580EX to compliment my 430EX and the ST-E2 trigger and figure out how to adapt em to light stands and umbrellas. That should put me around the $800 range total which is a lot better than $1600 and a heckuvalot more portable. Any recommendations/suggestions on a EOS mount portrait lens?

    Thanks again,
    It's hard to go wrong with the 50mm f/1.4 lens or the 100mm f/2.8 if you have a 1.6x camera. As for mounting hotshoe flash units to a light stand, these guys work great:
    http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=50067&is=REG&addedTroughType=categoryNavigation
    Creator of Dgrin's "Last Photographer Standing" contest
    "Failure is feedback. And feedback is the breakfast of champions." - fortune cookie
  • SteveMSteveM Registered Users Posts: 482 Major grins
    edited September 30, 2006
    It's hard to go wrong with the 50mm f/1.4 lens or the 100mm f/2.8 if you have a 1.6x camera. As for mounting hotshoe flash units to a light stand, these guys work great:
    http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=50067&is=REG&addedTroughType=categoryNavigation
    Awesome. Thanks again, Shay. 392 more questions and I'll be you! Say, will you pop over and set this all up for me, and shoot for me while you're here? :D Seriously, the handholding is much appreciated. I'll toss some results shots up in the future to show I'm paying attention in class.

    U R D r0x0r! (That's groovy for us old folks).bowdown.gif

    EDIT: Hmm, I might have to change my forum profile to "Aspiring to be Shay!". Sorry Andy! ;)
    Steve Mills
    BizDev Account Manager
    Image Specialist & Pro Concierge

    http://www.downriverphotography.com
  • PamelaPamela Registered Users Posts: 453 Major grins
    edited October 18, 2006
    Shay

    How's the Sunpak 555 going for you lately?
    You mentioned that you go through them often.

    I have had great luck using the Sunpak 622 pro for the last 10+yrs.
    I use it with my Mamiya 645 Pro.
    Both of these have been good to me, never broke down yet. (Well now that I said it, you know what is bound to happenheadscratch.gif )
    Thankyou

    Pamela

    www.exposedimages.net
  • Shay StephensShay Stephens Registered Users Posts: 3,165 Major grins
    edited October 18, 2006
    Pamela wrote:
    Shay

    How's the Sunpak 555 going for you lately?
    You mentioned that you go through them often.

    I have had great luck using the Sunpak 622 pro for the last 10+yrs.
    I use it with my Mamiya 645 Pro.
    Both of these have been good to me, never broke down yet. (Well now that I said it, you know what is bound to happenheadscratch.gif )

    From the looks of it, they seem to be lasting me about a year or about 40k-50k flashes. I have started putting dates on them so I can keep track of when to expect to replace them. I wouldn't mind a longer lasting flash, so in that vein, I am going to pick up another flash, and use it for a while to see if I can get a feel for how long they last.

    I have not been able to get any feedback from manufacturers or users as to the number of expected flashes it can produce before dying. The 622 is on my list and so is a metz, though I forget the model number at the moment. They are about twice the cost of the 555 if I remember right, so they need to at least do 100k flashes before pooping out for it to worth it.
    Creator of Dgrin's "Last Photographer Standing" contest
    "Failure is feedback. And feedback is the breakfast of champions." - fortune cookie
  • BodleyBodley Registered Users Posts: 766 Major grins
    edited October 19, 2006
    The 622 is on my list and so is a metz, though I forget the model number at the moment. They are about twice the cost of the 555 if I remember right, so they need to at least do 100k flashes before pooping out for it to worth it.

    Other than cost are there any reasons you don't use the Canon 580ex?
    Greg
    "Tis better keep your mouth shut and be thought of as an idiot than to open your mouth and remove all doubt"
  • Shay StephensShay Stephens Registered Users Posts: 3,165 Major grins
    edited October 19, 2006
    Bodley wrote:
    Other than cost are there any reasons you don't use the Canon 580ex?
    The 580ex has too many features (e.g. optical wireless triggering) that would just go to waste for me. All I need is manual variable power output, external power plug, and a sync plug I can trigger with pocket wizards.

    I decided a while ago to use non-dedicated flash units that could be used on any camera I happen to be using. A side benefit is that they tend to be less expensive that way too.
    Creator of Dgrin's "Last Photographer Standing" contest
    "Failure is feedback. And feedback is the breakfast of champions." - fortune cookie
  • PamelaPamela Registered Users Posts: 453 Major grins
    edited October 19, 2006
    Shay


    I have a question

    I have a Sunpak 422D, with a Canon (A-1,AE-1,etc) slow snyc Module, and a off camera cord.
    From the way I understand it, is that digital cameras can't get more than 6v from the flash. I checked the volts when triggering the flash and I get 5.99 volts.

    Today I went to a camera store, the person I spoke to said I could use that flash and it would be safe. He said that Canon cameras were always set up to only be able to use flashes that use 6 or less volts.
    I dont care that I wouldn't have TTL, because I have always set my cameras and flash to manual anyway.

    I really dont remember this, and I guess Im looking for advise, that it would not harm my Digital rebel.
    Thankyou

    Pamela

    www.exposedimages.net
  • SteveMSteveM Registered Users Posts: 482 Major grins
    edited October 19, 2006
    Pamela wrote:
    From the way I understand it, is that digital cameras can't get more than 6v from the flash. I checked the volts when triggering the flash and I get 5.99 volts.

    Today I went to a camera store, the person I spoke to said I could use that flash and it would be safe. He said that Canon cameras were always set up to only be able to use flashes that use 6 or less volts.
    I really dont remember this, and I guess Im looking for advise, that it would not harm my Digital rebel.

    Hey Pamela,

    It should say in your manual. I'm looking at my Canon 20D manual under "Using Non-Canon Flashes, p98" and it reads "Also, do not connect to the camera's PC terminal any flash unit requiring 250 V or more". I think Canon saw this as an issue and addressed it so that basically any reasonable flash can be used, but be sure to check your manual!
    Steve Mills
    BizDev Account Manager
    Image Specialist & Pro Concierge

    http://www.downriverphotography.com
  • Shay StephensShay Stephens Registered Users Posts: 3,165 Major grins
    edited October 19, 2006
    Pamela wrote:
    Shay


    I have a question

    I have a Sunpak 422D, with a Canon (A-1,AE-1,etc) slow snyc Module, and a off camera cord.
    From the way I understand it, is that digital cameras can't get more than 6v from the flash. I checked the volts when triggering the flash and I get 5.99 volts.

    Today I went to a camera store, the person I spoke to said I could use that flash and it would be safe. He said that Canon cameras were always set up to only be able to use flashes that use 6 or less volts.
    I dont care that I wouldn't have TTL, because I have always set my cameras and flash to manual anyway.

    I really dont remember this, and I guess Im looking for advise, that it would not harm my Digital rebel.
    Ya, if the voltage can shock you or run your hair dryer, it's too high for a camera mwink.gif otherwise, I don't worry about it.
    Creator of Dgrin's "Last Photographer Standing" contest
    "Failure is feedback. And feedback is the breakfast of champions." - fortune cookie
  • ziggy53ziggy53 Super Moderators Posts: 23,762 moderator
    edited October 20, 2006
    Pamela wrote:
    Shay


    I have a question

    I have a Sunpak 422D, with a Canon (A-1,AE-1,etc) slow snyc Module, and a off camera cord.
    From the way I understand it, is that digital cameras can't get more than 6v from the flash. I checked the volts when triggering the flash and I get 5.99 volts.

    Today I went to a camera store, the person I spoke to said I could use that flash and it would be safe. He said that Canon cameras were always set up to only be able to use flashes that use 6 or less volts.
    I dont care that I wouldn't have TTL, because I have always set my cameras and flash to manual anyway.

    I really dont remember this, and I guess Im looking for advise, that it would not harm my Digital rebel.

    Pamela,

    According to this page:

    http://www.botzilla.com/photo/strobeVolts.html

    I suspect your flash is OK.

    If it is a concern, you can purchase a Wein SafeSync which limits the voltage to a maximum of 6V. I use one of these with an old flash that puts out over 200V at the trigger and have had no problems.

    http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=245292&is=REG&addedTroughType=search

    ziggy53
    ziggy53
    Moderator of the Cameras and Accessories forums
  • PamelaPamela Registered Users Posts: 453 Major grins
    edited October 20, 2006
    ziggy53 wrote:
    Pamela,

    According to this page:

    http://www.botzilla.com/photo/strobeVolts.html

    I suspect your flash is OK.

    If it is a concern, you can purchase a Wein SafeSync which limits the voltage to a maximum of 6V. I use one of these with an old flash that puts out over 200V at the trigger and have had no problems.

    http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=245292&is=REG&addedTroughType=search

    ziggy53

    Thankyou

    I decided to call Sunpak , the tech said that both my Sunpak 622 and 422D are safe and wont damage my Rebel XT.
    She said that the warnings went out a while back when people were pulling 20 yr old flashes out of their closets and using on new digital cameras.
    Some cameras have a low trigger volt tolerance.
    She also mentioned that from her records that the rebel can tolerate 250v.
    That Im not aware of , I dont have time right now to check my camera book that came with it.
    If anyone has a flash that they would like to use with a new digital camera, the best thing to do is call the company the flash was made by and find out.
    PLEASE dont use a flash you have because of this reply.
    I also double checked the trigger volts, 6v or less .
    Thankyou

    Pamela

    www.exposedimages.net
  • cooldudecooldude Registered Users Posts: 1 Beginner grinner
    edited November 22, 2006
    Portable flash
    Hi Shay
    This is all fine but i have canon 20d and a pair of580ex flashs
    any idea what equipment i need for this setup?

    Thanks
  • Shay StephensShay Stephens Registered Users Posts: 3,165 Major grins
    edited November 23, 2006
    cooldude wrote:
    Hi Shay
    This is all fine but i have canon 20d and a pair of580ex flashs
    any idea what equipment i need for this setup?

    Thanks
    I don't use canon flashes, but you could most likely use the same setup, just leave out the sync cable or pocket wizards since you can use the infrared triggering. The light stand, umbrella adapter, and umbrella would still work I should think. Just make sure the umbrella adapter has a shoe adapter to hold the flash.

    You would need the canon infrared transmitter on the camera to trigger the light.
    Creator of Dgrin's "Last Photographer Standing" contest
    "Failure is feedback. And feedback is the breakfast of champions." - fortune cookie
  • Pixel PopperPixel Popper Registered Users Posts: 280 Major grins
    edited October 5, 2007
    Shay,

    Thanks so much for the incredible amount of information you have packed into this thread. I have a NOOB type question regarding shooting with the umbrellas.

    Is there ever a concern about the hardware, the stand, the adapters, the umbrella prongs, etc, casting a shadow of themselves into your composition? Is that something you have to concern yourself over during the set-up , or is the diffusion action of the umbrella itself enough to eliminate this worry?

    Thanks!
Sign In or Register to comment.