Nikon Sensor Cleaning

[Vycor]

So my sensors dirty. I received a dry/wet cleaning kit today but after numerous cleaning attempts, the sensor is STILL dirty. I managed to clean some of it, but yeah its still a bit dirty. Even under light i can see how its kinda dirty.

Nikons local to me, anybody know what they charge for a sensor cleaning, and how long does it take? Will they do it there while I wait?

I figure i'll let them clean it by their pros and then i'll keep up preventative maintenance with the cleaning kits. Ive never really cleaned it and only started blowing it recently, so basically ive had it 8 months with no real cleaning.

[Pezpix]

Vycor, not being familiar with Nikon's policy on sensor cleaning all I can do is offer a bit of advice for you. If you have stubborn organic dust material that is not getting removed at home, I'd also recommend letting the service center take charge.
I'm fortunate that I live within a few miles of my local Canon facility in Irvine where they've given me the dubious nickname "Norm" (as in Norm from Cheers) since I'm seemingly always there. Of course, they dont charge for the services and they usually have a quick turnaround (within a few hours).

Also, just a thought, but what cleaning system did you get by chance? Sometimes some sensor brushes can be a bit cumbersome to use...

[The Mack]

I too need my sensor on the D200 cleaned, but I think I might take it to the local photography store. They do good work and I trust them, so we'll see how much they charge me to do it.

[Harryb]

Check this (http://bythom.com/cleaning.htm) out.

[The Mack]

$50 to have the sensor cleaned.

[Harryb]

If you're going to shoot a DSLR you will get dust on your sensor. Usually a shoot or two from the rocket blower will do the trick. If that doesn't do the job then a swipe with a dry sensor brush is next. If taht doesn't do the job then a wet swab is next.

I've cleaned the sensors on my cameras numerous times w/o a problem. If you have dust that you can't get off throught he above methods then a trip to the shop is in order. However, if you send your camera in every time you get a dust bunny you be w/o a camera for a good bit of time and can get expensive.

[The Mack]

If you're going to shoot a DSLR you will get dust on your sensor. Usually a shoot or two from the rocket blower will do the trick. If that doesn't do the job then a swipe with a dry sensor brush is next. If taht doesn't do the job then a wet swab is next.

I've cleaned the sensors on my cameras numerous times w/o a problem. If you have dust that you can't get off throught he above methods then a trip to the shop is in order. However, if you send your camera in every time you get a dust bunny you be w/o a camera for a good bit of time and can get expensive.

I'm afraid there might be a smudge on the D200 sensor.
I really need to take a peak when I'm home from work, but I just haven't had time yet.

I don't want to mess w/ liquids.

[KennyS]

I believe it was $28 at Nikon in Melville last time I went. With a 24 hr turn around. Go in the building, make a right and down the stairs to service.