SOLD: Sony LCH-FHA aluminum hard case for 7x7/828

[Dani]

Price drop!

brushed aluminum, locking case. This thing holds everything!!! In the bottom compartment I had my sunpak 383 flash, omnibounce, 250D in case and IR filters on one side and on the other side I had the sony HGD 1.7x tele in case and sony HGD .7x wide angle in case. Camera 'shelf' fits over the top of this and held 717 in its soft case. Compartment to right held misc filters, spare batteries, tripod QR plate, lenspen, and charger, and memory stick case with several mem sticks went in the extra 'hidden' compartment in the top.

I don't have any photos of it loaded up cause I sold the lenses already... but trust me it fits!

Its in great shape with virtually no wear or tear... complete with both keys and the shoulder strap.

Since I'm stripping the sony down to bare essentials (ie IR filters and maybe the flash only) I don't need the case anymore.

Asking $100.00 shipped and paypalled.

http://images.amazon.com/images/P/B00007AKB8.01.LZZZZZZZ.jpg

[Dani]

yup.......

[Dani]

^^^^^^^^^^^^^^^^^

yup.......

[Dani]

PRICE DROP

$100 bucks

[nojke]

is it possible to take a few pics of the inside of it? and dimensions of the inside?

Thanks

[Dani]

is it possible to take a few pics of the inside of it? and dimensions of the inside?

Thanks
yup! here you go

empty

http://images16.fotki.com/v277/photos/7/70144/3006250/CRW_5035-vi.jpg

hidden compartment in top

http://images16.fotki.com/v283/photos/7/70144/3006250/CRW_5036-vi.jpg

Stuff ... I don't have any of the sony stuff left so I packed some canon stuff in it. but like I said.. had my sunpak 383 flash, omnibounce, 250D in case and IR filters on the left side and on the right I had the sony HGD 1.7x tele in case and sony HGD .7x wide angle in case.


http://images16.fotki.com/v277/photos/7/70144/3006250/CRW_5037-vi.jpg

camera

http://images16.fotki.com/v278/photos/7/70144/3006250/CRW_5039-vi.jpg

and in place

http://images16.fotki.com/v282/photos/7/70144/3006250/CRW_5038-vi.jpg

even fits if you have a soft case

http://images16.fotki.com/v278/photos/7/70144/3006250/CRW_5040-vi.jpg

dimensions are.....

12" x 6.5" x 6.5" deep (not counting extra space in top) total
as configured now the far far right compartment is 2.25" x 6.5" , middle is 5" x 6.5" , and far left is 4" x 6.5". You can move the dividers or take them out all together though.

[NDeb]

This is a very nice case, I had one of these for my 717 & 828--very sturdy and holds a lot! Good price, Dani, I paid a lot for my Sony case. Bump for this beautiful item!:D


yup! here you go

***hey folks, no need to stretch the thread out by quoting ALL the photos!***

[nojke]

i wonder if the 828 will fit into that foam thingy for the 717? any ideas?

also one more measurement please.. the height of the dividers in the middle.

the 555's measurements are (layed down on its side) 4 x 10.25 x 4 and with the 828 on top of that is approx. 7 3/4" tall x 10.25" width 4" deep.

Im hoping that this will fit 2 sunpak 555's / 2 wireless radio slaves /my 828 on top /f32x flash/ along with some filters and etc.

kinda tight.. i know...

[Dani]

the small middle divider is 4.25 x 6..

if you take it out then theres about 9.25L x 6W x 4D underneath the camera platform

i wonder if the 828 will fit into that foam thingy for the 717? any ideas?

also one more measurement please.. the height of the dividers in the middle.

the 555's measurements are (layed down on its side) 4 x 10.25 x 4 and with the 828 on top of that is approx. 7 3/4" tall x 10.25" width 4" deep.

Im hoping that this will fit 2 sunpak 555's / 2 wireless radio slaves /my 828 on top /f32x flash/ along with some filters and etc.

kinda tight.. i know...

[NDeb]

After I gave my 717 to my sister, I kept the case for my 828 and it fit fine, except that it is a little longer and wider than the 717, but it still could be placed on the upper tray, strapped down. I gave the case to my sister for her 717 after I sold my 828 a year later. -debbie



i wonder if the 828 will fit into that foam thingy for the 717? any ideas?

also one more measurement please.. the height of the dividers in the middle.

the 555's measurements are (layed down on its side) 4 x 10.25 x 4 and with the 828 on top of that is approx. 7 3/4" tall x 10.25" width 4" deep.

Im hoping that this will fit 2 sunpak 555's / 2 wireless radio slaves /my 828 on top /f32x flash/ along with some filters and etc.

kinda tight.. i know...