View Full Version : CANON 50MM/F1.0 LENS... (CraigsList Seattle)
Seymore
Dec-28-2005, 01:29 PM
Andy, you need this lens...
http://seattle.craigslist.org/for/121034687.html
.
Andy
Dec-28-2005, 01:35 PM
Andy, you need this lens...
http://seattle.craigslist.org/for/121034687.html
.
:nah I can wait for the 50 f/1.2 that's rumored (http://www.dgrin.com/cameras/12027-rumor-canon-50-f-1-2l.html?highlight=rumor+canon) :D
Thanks Seymore!
patch29
Dec-28-2005, 01:38 PM
:nah I can wait for the 50 f/1.2 that's rumored (http://www.dgrin.com/cameras/12027-rumor-canon-50-f-1-2l.html?highlight=rumor+canon) :D
Thanks Seymore!
and just how long will we have to wait? :ear :D
Seymore
Dec-28-2005, 01:39 PM
:nah I can wait for the 50 f/1.2 that's rumored (http://www.dgrin.com/cameras/12027-rumor-canon-50-f-1-2l.html?highlight=rumor+canon) :D
Thanks Seymore!
Ok... just saw this and thought of you. There are some dgrinners that may want some glass this fast. Just gotta come up with a couple K...
John Mueller
Dec-28-2005, 01:54 PM
Slobering on myself:1drink
Red Bull
Dec-28-2005, 01:55 PM
All I can say is wow....:jawdrop
pathfinder
Dec-28-2005, 07:23 PM
[quote=pathfinder]Andy, did you see my pictures of the 50mm f1.4 and 50mm f1.2 Zuicko's? -
I don't understand the significance of the filter diameter size. I didn't think the front element was the limiting aperture on these lenses....
erich6
Dec-28-2005, 07:57 PM
Andy, did you see my pictures of the 50mm f1.4 and 50mm f1.2 Zuicko's? -
http://www.dgrin.com/153874-post50.html
I don't understand the significance of the filter diameter size. I didn't think the front element was the limiting aperture on these lenses....
erich6
Dec-28-2005, 08:09 PM
Do you suppose this new "fast" prime will be an EF-S lens?
Photobug brought up the point (in Andy's link) that it's easier to make a good quality fast lens for an APS-sized sensor than a full format. That makes sense to me because you have less likelyhood of vignetting, stray light, and aberrations at the edges of the frame.
Many have argued that "full-format" (35 mm) is a better way to go because you get more angle of view and larger pixels (or more!) with better dynamic range. Well, with CMOS technology improving continously, it seems that a smaller sensor will eventually give you a good enough dynamic range and allow you to have larger aperture long lenses that are smaller and lighter than their full-frame equivalent would be. I think many would take higher optical quality, lighter, and smaller lenses over extended dynamic range.....
Erich
Andy
Dec-28-2005, 08:16 PM
Do you suppose this new "fast" prime will be an EF-S lens?
No - EF, L. :deal
erich6
Dec-28-2005, 08:18 PM
No - EF, L. :deal
Ooops! missed the "L" reference! :doh
pathfinder
Dec-28-2005, 08:30 PM
I don't understand the significance of the filter diameter size. I didn't think the front element was the limiting aperture on these lenses....
I wasn't suggesting that the filter size was limiting factor - just that both the 1.4 and 1.2 shared the same size 49mm filters, to demonstrate how little difference there really is between the two lenses.
50mm/f1.2= 41.6666 mm front aprature
50mm/f1.4= 35.7mm front aperature
erich6
Dec-28-2005, 08:43 PM
I wasn't suggesting that the filter size was limiting factor - just that both the 1.4 and 1.2 shared the same size 49mm filters, to demonstrate how little difference there really is between the two lenses.
50mm/f1.2= 41.6666 mm front aprature
50mm/f1.4= 35.7mm front aperature
Got it. Thanks! :thumb
David_S85
Dec-28-2005, 09:48 PM
Some more info on that lens...
http://www.canon.com/camera-museum/camera/lens/f_lens.html
Matthew Saville
Dec-28-2005, 11:34 PM
Okay guys, pardon my Canon-dumbness, but on KEH I see Canon FD 50mm f/1.2 FD lenses for $140 or $225, and f/1.2 L FD lenses for "only" $500. Is there any desirability with either of these lenses? Despite the fact that you have to use an adapter and then manual focus which is probably impossible with an f/1.2 lens on a 1.6x cropped viewfinder...
Any ideas?
-Matt-
David_S85
Dec-29-2005, 12:07 AM
Okay guys, pardon my Canon-dumbness, but on KEH I see Canon FD 50mm f/1.2 FD lenses for $140 or $225, and f/1.2 L FD lenses for "only" $500. Is there any desirability with either of these lenses? Despite the fact that you have to use an adapter and then manual focus which is probably impossible with an f/1.2 lens on a 1.6x cropped viewfinder...
Any ideas?
-Matt-
Despite the lure of 1.0's, 1.2's and even an f/0.95 (yes, there was such an animal), using an adaptor will limit your focus range meaning you'll either give up focusing at infinity, or at the closer setting (I forget which). Older lenses did not focus beyond infinity as the newer auto lenses do. The lack of both autofocus and autoaperture control might not bother some shooters, but there have been significant advances in lens materials, reduction of weight and volume not to mention ergonomics. Then there's the fact that what you're really bargaining for is less than one stop of light difference.
Not trying to totally disuade anyone from mounting these antiques with converters on EF setups, but sheesh! I mean, these admittingly marvelous lenses would be better paired with their old friends -- the F-1, AE-1 or A-1 -- to better complete the novelty. Then scan the results.
I have a 50 f/1.4 FD (for my 1978 AT-1), and it just wasn't that good compared with a modern (and ultra cheap) EF 50 f/1.8. The FD lens is destined to be used again for only one reason... to reverse mount it for macros with an adaptor ring.
If you have one of these old classics in your closet, then by all means yes, try it. But I wouldn't go out and spend a couple hundred bucks on one to experiment with.
vBulletin® v3.8.5, Copyright ©2000-2012, Jelsoft Enterprises Ltd.